新闻资讯

化粪池钢模具使用前的准备工作

2020-01-06 11:06:31

化粪池钢模具在加工时用到的钢板都是经过了激光切割,保证了模具焊接完成后的尺寸准确,并且钢模具的使用特点就是加工简单,而预制的这种加工方式有着技术的保障,因此在生产时需要将模具先来进行擦拭,之后刷油注浆,经过震动后就可以等待泥浆的凝固。那么在生产时需要多个工人同时来进行生产,并且注意好对于钢模具的保护工作,采用5mm钢板制作出来的化粪池钢模具,在生产时不一出现变形的情况,而且在高温与寒冷的情况下都可以正常进行使用,而且能够直接的放置在地面上,化粪池模具的表面都是有保护剂涂刷的,形成了保护层后这样模具在使用时就会减少磨损的问题。

The steel plates used in the processing of the septic tank steel mold are all laser cut to ensure the accurate size of the mold after welding, and the use of the steel mold is characterized by simple processing, while the prefabricated processing method has the technical guarantee, so the mold needs to be wiped first in production, then oil painting and grouting, after vibration, it can wait for the mud to solidify 。 In production, multiple workers are required to conduct production at the same time, and pay attention to the protection of the steel mold. The septic tank steel mold made of 5mm steel plate can be used normally in high temperature and cold conditions, and can be directly placed on the ground. The surface of the septic tank mold is protected When the coating agent is applied, a protective layer is formed so that the wear of the mould can be reduced when it is used.

化粪池钢模具生产的时候更多会选择的就是预制生产的方式来进行加工,因为制作出来的化粪池规格较大一些,要保证该种预制件的质量,这种情况下来选择预制件的方式进行制作的话才能够保证化粪池的完整生产,并且化粪池表面不能够出现裂缝与任何的空隙,化粪池主要的施工目的就是将一些排泄物进行二次处理与储存,以用来做其他的处理,所以说在进行制作时一定要保证模具的密封效果。每次生产之前先将整体式化粪池模具进行简单的清理,表面上的一些灰尘清洗干净后通过螺栓来进行组装,组装完成后的模具要进行检查,可以注入一些清水如果不会出现漏水的问题就证明模具可以正常使用了,接下来将整体式化粪池钢模具中涂刷上脱模剂或者是机油,之后就可以来浇筑泥浆进行生产了。

In the production of septic tank steel mold, the prefabricated production method is more likely to be selected for processing. Because the size of the septic tank produced is larger, the quality of the prefabricated parts should be guaranteed. In this case, the prefabricated parts can be selected for production to ensure the complete production of septic tank, and the surface of septic tank can not have cracks and any gaps, The main construction purpose of the septic tank is to carry out secondary treatment and storage of some wastes for other treatment, so it is necessary to ensure the sealing effect of the mold when making. Before each production, the integral septic tank mold shall be cleaned simply, and some dust on the surface shall be cleaned and then assembled by bolts. After the assembly, the mold shall be inspected, and some clear water can be injected. If there is no water leakage, the mold can be used normally. Next, the integral septic tank steel mold shall be coated with release agent or The engine oil can then be poured into the mud for production.

联系方式
ico04
联系人

边经理

ico01
电话

0312-8103818

ico06
手机

18803129528

ico05
QQ

107108222

ico03
邮箱

925474963@qq.com

ico02
地址

河北省保定市清苑区阎庄乡高庄村